Home › FAQ
FAQ
Frequently asked questions
Answers about the CAEE internships, fees, certificates, free workshops and the Remote Hardware Lab. Prices and durations come from the current programme settings.
Common questions
Do I need to own the hardware?
No. You write the code in your browser. Code exercises are checked automatically online, and the CAN projects run on real STM32 hardware in the CAEE Remote Hardware Lab — there is no board to buy.
Is the internship remote?
Yes — it's a code-first remote internship with mentor feedback on each module.
I'm from CSE/EEE, not ECE. Can I join?
Yes. Foundations start from C fundamentals.
Will I get a certificate?
Yes — a verifiable CAEE certificate on completing all the modules and projects of your track. Anyone can check its ID at caee.co.in/verify.
Programme facts
What does the CAN / CAN-FD Internship cover?
CAN / CAN-FD Internship (CAN/CAN-FD Communication & Safety): A CAN/CAN-FD communication and safety internship on the STM32 NUCLEO-G474RE. You'll build a deterministic embedded-C kernel, wire and diagnose a real two-node CAN-FD physical layer, work through frame arbitration and fault confinement, calculate valid FDCAN bit timing, design a protected signal-encoding scheme, and implement a receiver-side safe-state machine that rejects invalid traffic. It has 11 modules and 4 hands-on projects, on NUCLEO-G474RE + MCP2562FD. CAN / CAN-FD Internship
Who can join the CAN / CAN-FD Internship?
Open to B.Tech, M.Tech and diploma students and working engineers (ECE, EEE, CSE, E&I). Needs basic C. CAN / CAN-FD Internship
How much does the CAN / CAN-FD Internship cost?
The CAN / CAN-FD Internship (CAN/CAN-FD Communication & Safety) costs ₹35,000 / 4-6 months. It includes Remote Hardware Lab access for 45 days. See the syllabus
What does the FOC Motor Control Internship cover?
FOC Motor Control Internship (Sensored PMSM Field-Oriented Control (FOC) Motor Drive): A sensored motor-control internship on the STM32 NUCLEO-G474RE with the X-NUCLEO-IHM08M1 driver. You'll implement the full FOC stack — current sensing and ADC calibration, Clarke/Park transforms, discrete PI current control with anti-windup, SVPWM, and nested speed control — then close the loop on a digital twin with quantitative protection and verification experiments. It has 8 modules and 4 hands-on projects, on NUCLEO-G474RE + X-NUCLEO-IHM08M1. FOC Motor Control Internship
Who can join the FOC Motor Control Internship?
Open to anyone with basic C, signals & control systems and electrical machines — usually final-year B.Tech (EEE/ECE) or M.Tech students; strong pre-final-year students are welcome. FOC Motor Control Internship
How much does the FOC Motor Control Internship cost?
The FOC Motor Control Internship (Sensored PMSM Field-Oriented Control (FOC) Motor Drive) costs ₹45,000 / 4-6 months. It includes Remote Hardware Lab access for 45 days. See the syllabus
Can I start for free?
Yes. Each track has a free workshop with modules, a final assessment and a free certificate when you pass the assessment. Free workshops
How can an employer check a CAEE certificate?
Every CAEE certificate carries a unique ID. Anyone can enter it on the Verify a certificate page to confirm that it is genuine and see who it was issued to. Verify a certificate
What is the Remote Hardware Lab?
An online lab where your embedded C runs on a real STM32 NUCLEO-G474RE in the CAEE lab, on a real 500 kbit/s CAN bus, and is scored automatically from the measured CAN traffic. It has 13 automotive ECU projects. No board to buy. Remote Hardware Lab
Where is CAEE based?
Centre for Automotive Embedded Engineering (CAEE) is based in HSR Layout, Bengaluru, Karnataka 560102, India. The internships run online, so you do not need to be in Bengaluru.
CAN / CAN-FD Internship · FOC Motor Control Internship · Free workshops